Southeast Michigan Woodworkers

Gather, share, learn and enjoy with other woodworkers!
It is currently Mon Oct 23, 2017 1:08 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Clearing out shop
PostPosted: Tue May 16, 2017 6:47 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Everything is sold pending payment.


Circumstances have changed significantly for me and I'll be selling my shop. I'd like to gauge interest here in any of the bigger machines before I post elsewhere, as I'd rather the machines go to a local member. If anyone is interested in anything, I'll work on pictures. These prices are for local members only. Make an offer if I'm off.

1. Powermatic 66, circa 1990s USA-made, 3hp single phase on a mobile base with 52" beisemeyer fence, plinth has some surface rust but solid. $1000.
2. Oliver 399 18" planer, circa 1960s, 3hp three phase, very clean original shape, includes knife grinder and all accessories, on a hefty mobile base I built. $2500
3. Porter 16" jointer, circa 1920s-30s, pedestal base, oil-bath ball bearings, 3-knife round cutterhead, direct drive 4hp (according to the literature I could find) motor, with original starter and switch. $1200. SOLD PENDING PAYMENT.
4. Torit Model 19 cyclone with Jet 3hp single phase blower w/14" impeller. The dust separation is fantastic and Torits are durable, thick-gauge steel for industrial applications. Requires nearly 9' of ceiling clearance. $600
5. Lots of 6" S&D PVC pipe and fittings, all like new, just dusty. I'll inventory if there's interest.
6. DeWalt GWI 10" radial arm saw, 1.5hp single phase. $200
7. Delta 14" drill press, single phase, production base benchtop model (production base is also the stand). $250
8. 7.5hp American Rotary phase converter, like new. $350
9. About 150bf of cherry and 1-5 boards each of poplar, maple, mahogany, walnut, ash, etc. Most is 4/4, some 6/4 and 8/4.
10. Router table, I converted an old vintage shaper, small footprint, Bench Dog cast iron router lift, Porter Cable 3hp router, super beefy fence I built, tons of bits, many new. $600.

I'll eventually have smaller items also, like clamps and such. Just starting with the larger tools. Thanks.

Zayd


Last edited by zayd on Wed May 24, 2017 10:07 pm, edited 2 times in total.

Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Tue May 16, 2017 8:59 pm 
Offline
Obsessed
User avatar

Joined: Sat Dec 11, 2004 5:59 pm
Posts: 1607
Location: Northville, MI
shock

_________________
Jim Young
http://www.simoli.net


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Wed May 17, 2017 2:46 pm 
Offline
Lurker

Joined: Thu Mar 23, 2017 12:30 pm
Posts: 7
PM sent on the pipe and lumber


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Wed May 17, 2017 6:39 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
I forgot to mention that the jointer includes a VFD, so it can be run on single phase power.


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Fri May 19, 2017 8:30 am 
Offline
Elite

Joined: Tue Oct 27, 2009 9:14 am
Posts: 1373
Zayd, I sincerely hope this change is a positive one.


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Sat May 20, 2017 6:32 am 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Thanks for your thoughts, Bob. It is a necessary change. I'm just keeping priorities in perspective. I'm hoping I'll be able to eventually get back into it at a later time.

Hope all is well with you.


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Sat May 20, 2017 6:37 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Finally got some pictures. Forgive some of the tight shots. I'm moving a lot around and couldn't take wide shots of some items.

Powermatic 66

Attachment:
IMG_0546.JPG
IMG_0546.JPG [ 273.22 KiB | Viewed 423 times ]
Attachment:
IMG_0579.JPG
IMG_0579.JPG [ 254.83 KiB | Viewed 423 times ]



Oliver 399 18" Planer

Attachment:
IMG_0549.JPG
IMG_0549.JPG [ 225.01 KiB | Viewed 423 times ]
Attachment:
IMG_0559.JPG
IMG_0559.JPG [ 198.68 KiB | Viewed 423 times ]
Attachment:
IMG_0554.JPG
IMG_0554.JPG [ 211.36 KiB | Viewed 423 times ]
Attachment:
IMG_0555.JPG
IMG_0555.JPG [ 232.92 KiB | Viewed 423 times ]
Attachment:
IMG_0556.JPG
IMG_0556.JPG [ 255.57 KiB | Viewed 423 times ]
Attachment:
IMG_0560.JPG
IMG_0560.JPG [ 211.2 KiB | Viewed 423 times ]
Attachment:
IMG_0553.JPG
IMG_0553.JPG [ 171.71 KiB | Viewed 423 times ]
Attachment:
IMG_0564.JPG
IMG_0564.JPG [ 189.21 KiB | Viewed 423 times ]


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Sat May 20, 2017 6:53 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Porter 16" Jointer

Attachment:
IMG_0567.JPG
IMG_0567.JPG [ 214.41 KiB | Viewed 423 times ]
Attachment:
IMG_0568.JPG
IMG_0568.JPG [ 176.98 KiB | Viewed 423 times ]
Attachment:
IMG_0570.JPG
IMG_0570.JPG [ 210.17 KiB | Viewed 423 times ]
Attachment:
IMG_0571.JPG
IMG_0571.JPG [ 220.78 KiB | Viewed 423 times ]
Attachment:
IMG_0573.JPG
IMG_0573.JPG [ 262.58 KiB | Viewed 423 times ]
Attachment:
IMG_0574.JPG
IMG_0574.JPG [ 198.06 KiB | Viewed 423 times ]
Attachment:
IMG_0575.JPG
IMG_0575.JPG [ 142.22 KiB | Viewed 423 times ]
Attachment:
IMG_0576.JPG
IMG_0576.JPG [ 125.98 KiB | Viewed 423 times ]



Delta 14" Drill Press

Attachment:
IMG_0577.JPG
IMG_0577.JPG [ 208.76 KiB | Viewed 423 times ]
Attachment:
IMG_0578.JPG
IMG_0578.JPG [ 177.41 KiB | Viewed 423 times ]


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Sat May 20, 2017 6:57 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Dewalt GWI 10" Radial Arm Saw

Attachment:
IMG_0582.JPG
IMG_0582.JPG [ 167.01 KiB | Viewed 423 times ]
Attachment:
IMG_0580.JPG
IMG_0580.JPG [ 178.32 KiB | Viewed 423 times ]
Attachment:
IMG_0583.JPG
IMG_0583.JPG [ 122.3 KiB | Viewed 423 times ]



American Rotary 7.5hp Phase Converter

Attachment:
IMG_0588.JPG
IMG_0588.JPG [ 275.21 KiB | Viewed 423 times ]
Attachment:
IMG_0590.JPG
IMG_0590.JPG [ 269 KiB | Viewed 423 times ]


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Sat May 20, 2017 8:27 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Also counted up the S&D PVC piping and fittings. Lengths are within an inch or two.

6" pipe lengths
    110"
    42"
    40"
    31" (x4)

6x6x6 wyes: 6
6x6x4 wyes: 2
6" 45-degree elbows: 9
6" 90-degree elbow: 1
6" long-sweep 90 elbow: 1
4" 90-degree elbow: 1
4" 45-degree street elbow: 1
4" 22.5-degree elbow: 1

There are also a few more 6" and 4" fittings as well as another length or two of 6" pipe stored away that I couldn't get to. That's included also.

Lastly, I'm including 5 6" blast gates. These are my design and build. They are 6" couplings PVC-glued into PVC trim board (Azek) with the same material as a spacer for the 3/16" hardboard gate. The ends of the gate are made from PVC trim that goes around those 4x8' lattice sheets. The white end in means the gate is open and the gray end in means it is closed. I have enough parts for at least another one or two of these. They're all pre-cut and ready to glue.

Everything for $250.

Attachment:
IMG_0591.JPG
IMG_0591.JPG [ 144.35 KiB | Viewed 416 times ]
Attachment:
IMG_0592.JPG
IMG_0592.JPG [ 95.53 KiB | Viewed 416 times ]
Attachment:
IMG_0593.JPG
IMG_0593.JPG [ 101.81 KiB | Viewed 416 times ]


Top
 Profile  
 
 Post subject: Re: Clearing out shop
PostPosted: Wed May 24, 2017 10:08 pm 
Offline
Elite

Joined: Fri Apr 04, 2008 4:07 am
Posts: 733
Location: Dearborn, MI
Everything is sold pending payment.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Forum hosting by ProphpBB | Software by phpBB | Report Abuse | Privacy